Description

If lugs nuts are torqued down too tight you can snap off the lug nut and stud.  This is the part you will need if that happens.  These have worked on almost all of the Spartans we have worked on but check the sizes to be sure.  On some of the Spartans 1955 and after, the lug nut ends up being flush with the lug stud.  In other words, there are no threads sticking out past the lug nut.  This is fine so long as none of the treads of the lug nut is exposed. 

Details

Application: Fits most Spartan and Spartanette hubs

Height: 3/4"

Width: 3/4"

Depth: 1-1/2"

Part Number: CCH021